Our Reviews
How much does toilet repair or replacement cost in San Antonio?
A standard toilet swap runs $200 to $400 in labour, plus $150 to $500 for the unit itself. Premium or smart toilets start around $600 and run past $1,500 for the fixture alone. Repairs to a running, leaking or weak-flushing toilet are usually well under a replacement.
Apollo Air Heating & Cooling Plumbing Services:
Toilet repairs we handle
A toilet that runs constantly is usually a flapper or a fill valve, and it is the cheapest thing on this page to fix — worth doing quickly, because a running toilet can waste more water in a month than the repair costs. Weak or incomplete flushing is often mineral buildup in the rim jets, which is common on San Antonio’s hard water. A toilet that rocks, or one with damp around the base, means the wax ring or the flange underneath, and that one does not improve with time.
We are licensed, bonded and insured for both trades (TACLA128041E, M39895), and every repair carries a 100% workmanship guarantee. Same-day service is usually available, and there is currently $50 off any plumbing repair.
Replacement and installation
Replacing like for like is a straightforward visit: shut off, drain, remove, set the new unit on a fresh wax ring, reconnect, test. What turns it into a longer job is what the old toilet was hiding — a corroded flange, or a soft patch of subfloor from a leak that has been going quietly for a while. We tell you before we start if we find it, not after.
Water-efficient upgrades
A toilet from before the mid-1990s can use three and a half gallons or more per flush against 1.28 for a modern high-efficiency model. In a house with two or three of them, that is a visible difference on a SAWS bill, and comfort-height models are worth considering while you are choosing anyway.
What toilet work costs in San Antonio
| SERVICE | SAN ANTONIO RANGE, 2026 | WHAT DRIVES IT |
|---|---|---|
| Labour, standard swap | $200 – $400 | Removing the old unit and setting the new one. The common case, when nothing underneath is damaged. |
| Toilet unit | $150 – $500 | Standard through comfort-height and dual-flush models. |
| Premium or smart toilet | $600 – $1,500+ | Fixture only. Bidet seats, heated seats and integrated units sit here. |
| Flange or subfloor repair | Quoted on inspection | Only found once the old toilet is off. Hard water and long-term seepage are the usual causes here. |
Repair or replace usually comes down to age and what is failing. Internal parts on a sound toilet are worth fixing. A cracked tank or bowl, a toilet that has been rocking long enough to damage the flange, or a pre-1995 fixture using three times the water of a new one is usually worth replacing instead.
Why homeowners here call us for Toilet Repair & Installation
BBB Accredited A+, 5.0 stars across 900+ Google reviews, and founded here in 2023 by Gabriel Garcia and Matthew Reyes — who are both still on jobs.
“Nick was friendly and also professional. Gave me options for different levels of repairs from which to choose for my toilet.”
Jacquelyn L. gOOGLE Review
Same-day toilet service Across San Antonio
- Boerne, TX
- Bulverde, TX
- Cibolo, TX
- Fair Oaks Ranch, TX
- Helotes, TX
- Hollywood Park, TX
- New Braunfels, TX
- San Antonio, TX
- Schertz, TX
- Selma, TX
- Shavano Park, TX
- Stone Oak, TX
current Specials
Frequently Asked Questions
How much does it cost to replace a toilet in San Antonio?
Labour for a standard swap runs $200 to $400, and the unit itself $150 to $500 for a standard through comfort-height model. Premium and smart toilets start around $600 for the fixture. You get a flat price before we start.
Should I repair or replace my toilet?
Repair if the toilet is sound and the problem is internal — a flapper, fill valve or flush valve. Replace if the tank or bowl is cracked, if it has been rocking long enough to damage the flange, or if it predates the mid-1990s and uses three times the water of a current model. We will tell you which yours is before quoting either.
Why does my toilet keep running?
Almost always the flapper or the fill valve. The flapper is a rubber seal that hardens over time and stops sealing; the fill valve can stick or set too high so water runs continuously into the overflow. Both are inexpensive parts and a short visit — and worth not putting off, because a running toilet can waste hundreds of gallons a week.
Can you install a toilet I bought myself?
Yes. Bring it home and we will set it — labour runs $200 to $400 for a standard swap. Worth knowing that a unit you supply is covered by its own manufacturer warranty rather than ours, though our workmanship guarantee still covers the installation.
Do you offer same-day toilet repair in San Antonio?
Usually. An overflowing or unusable toilet in a one-bathroom house is not something to book for next week, and there is round-the-clock cover for exactly that. Ring and ask what today looks like.